GB2626-2019 Standard Surgical Masks: With Factory Price, Suitable for Hospitals & Visits

underneath the background of epidemic prevention and control normalization, the disposable non-woven fabric mask has emerge as an imperative protecting product in every day lifestyles because of its comfort and effectiveness. this text will delve into the cloth, technique, and shielding performance of disposable non-woven material masks beneath the GB2626-2019 preferred, as well as their application in clinical environments and charge benefits. it will additionally emphasize the significance of expert after-sales provider.

Product Overview: Introduction to the GB2626-2019 Standard Medical Mask

The GB2626-2019 preferred clinical mask, as an important a part of China’s clinical shielding substances, is designed strictly according with the GB2626-2019 country wide wellknown. This mask is made on the whole from high-density non-woven material, mixed with superior technology, aiming to offer effective safety for customers.

The material of the mask capabilities a 3-layer shape, with the internal layer made of pores and skin-pleasant fabric, the center layer of meltblown non-woven cloth, and the outer layer of water resistant and dustproof fabric. This 3-layer design no longer handiest enhances the filter out performance of the masks but additionally ensures consolation in the course of wear. The meltblown non-woven fabric layer, because the middle filtering material, correctly blocks micro organism, viruses, and different microscopic particles, meeting the protective needs in scientific environments.

The mask’s strap design is reasonable, the usage of an ear-loop fashion for easy adjustment of tightness, making sure a near match with the face to efficaciously reduce the entry of pollutants inside the air. the rims of the masks are finely processed to avoid inflammation throughout put on.

In terms of defensive overall performance, the GB2626-2019 general medical masks is categorised into three tiers based totally on filtration efficiency: N95, FFP2, and FFP3. The N95 mask achieves a filtration efficiency of ninety five%, the FFP2 mask reaches 94%, and the FFP3 masks achieves ninety nine%. users can choose the corresponding degree of masks based on different protecting requirements.

The mask has additionally been optimized for sealing. The nose bridge a part of the mask capabilities a adjustable metallic strip, allowing customers to modify according to their very own nostril bridge shape to make sure that there is no air leakage during put on.

In scientific utility situations, the GB2626-2019 popular scientific mask is suitable for hospitals, clinics, laboratories, and different places, providing important safety for scientific group of workers, sufferers, and site visitors. specifically for the duration of flu season or throughout outbreaks of epidemics, this mask turns into an vital tool for safeguarding the fitness of the humans.

In phrases of pricing, due to the manufacturing unit direct income model, the GB2626-2019 fashionable medical mask has a widespread rate benefit. by producing without delay, the middleman’s costs are saved, lowering prices and making the product extra less expensive.

The manufacturer affords comprehensive after-sales carrier. A expert team is answerable for product consultation, ordering, and after-income guide, ensuring that any issues encountered via customers all through use are resolved in a well timed way. In summary, the GB2626-2019 standard clinical masks, with its high fine, excessive performance, and low cost fee, has come to be a relied on shielding product within the marketplace.

Core Requirements of GB2626-2019 Standard Interpretation

The GB2626-2019 popular for medical mask units strict necessities for high-quality, which can be specified as follows:

The materials of the masks should comply with country wide requirements, inclusive of the filter material, nostril clip, ear bands, and other additives. The filter material generally makes use of meltblown nonwoven fabric, which has true filtration performance and sturdiness.

the size of the masks should comply with anthropometric design to make certain comfort and a snug healthy on the face. particular size necessities encompass the period and width of the masks, as well as the duration and width of the nose clip, to make sure powerful insurance of the mouth and nose throughout put on.

The filtration performance of the masks is a key indicator of its protective capability. The GB2626-2019 widespread specifies the filtration performance of different grades of masks, such as FFP2, FFP3, and so forth., which correspond to unique bacterial filtration efficiencies. The FFP3 grade masks can filter at least ninety nine.ninety five% of bacteria.

The sealing performance of the mask is tested through airtightness exams. The masks must have right airtightness while worn to prevent pollution inside the air from coming into the masks indoors.

The bodily power of the masks is an crucial indicator for comparing its sturdiness, together with tear resistance and puncture resistance, to ensure that the mask does now not tear or puncture at some stage in everyday use.

The microbiological signs of the masks are strictly required, including the survival rates of micro organism and fungi, to ensure that the mask has been strictly disinfected earlier than shipment to prevent go-infection.

The packaging and labeling of the masks must also meet the usual necessities, together with product call, production batch number, expiration date, production date, and utilization instructions, to facilitate accurate use and identification by using the consumer.

The resistance of the mask to chemical compounds and heat is likewise a issue considered in the general, making sure that the mask continues its shielding overall performance underneath various environmental situations.

the same old additionally specifies the testing techniques for mask, together with filtration performance, airtightness, bodily strength, microbiological indicators, and other detection methods, to make certain the traceability of mask first-class.

Material and Technology: The Fabric and Production Technology of Disposable Non-Woven Face Masks

the producing procedure of disposable non-woven cloth mask involves various high-performance materials, with the core attention being on ensuring the consolation and effectiveness of the masks. under is an in depth evaluation of the materials and production technology:

materials:the principle substances used within the manufacturing of disposable non-woven cloth mask include:

1. Non-woven material: Serving as the primary material of the masks, non-woven fabric is usually crafted from synthetic fibers along with polypropylene (PP), which offers appropriate breathability and bacteriostatic residences. Its surface is handled to successfully prevent the penetration of micro organism and viruses.

2. dust-loose Paper: Used as the center layer of the masks, dust-free paper is generally crafted from natural wood pulp, which has excessive filtration performance and desirable electrostatic adsorption properties, able to taking pictures microscopic particles.

3. Adhesives: Adhesives are used to bond the non-woven material and dust-free paper layers together. generally used adhesives are hot melt adhesives, which have desirable bonding power and temperature resistance.

manufacturing technology:The production manner in particular includes the following steps:

1. Non-woven material manufacturing: thru techniques such as melting, laying, webbing, reinforcement, and cutting, polypropylene and other artificial fibers are processed into non-woven material.

2. dirt-unfastened Paper Processing: wood pulp is processed into dust-unfastened paper thru methods which includes pulping, papermaking, and drying, making sure its filtration performance and energy.

three. Lamination: Non-woven fabric and dirt-loose paper are bonded collectively using warm melt adhesives to shape the primary structure of the mask.

four. slicing and Folding: The bonded cloth is reduce precisely to shape the form of the masks and is folded to suit the facial contour of the wearer.

1. Adhesive nose Strip: A pliable nostril strip is bonded to the nose part of the mask to help it higher suit the face, enhancing the protective effect.

2. Bagging and Packaging: The finished mask are packed, placed in dust-proof bags, and undergo very last packaging processing.

in the course of the manufacturing method, strict fine manipulate is crucial. every step from raw fabric procurement to completed product cargo needs to go through rigorous inspection to ensure the pass fee of the mask. additionally, production device need to be frequently maintained and up to date to make certain the high-quality and output of the masks.

To beautify the comfort of the masks, the ear bands are also optimized within the manufacturing system, making them softer and extra fitting to reduce pain during wear. furthermore, through special processing techniques, the masks preserve top defensive overall performance while imparting great breathability, allowing wearers to use them quite simply for extended periods.

In summary, the materials and manufacturing technology of disposable non-woven cloth mask are their core. via careful material selection and superior technologies, the masks make sure efficient safety and relaxed put on.

Protection Performance: Analysis of Protection Grades under GB2626-2019 Standard

The GB2626-2019 general has strict requirements for the protective overall performance of medical masks, and the following is an in depth clarification of the protecting levels under this standard:

1. clear out performance: the same old calls for that scientific masks have a filter efficiency of no longer less than 95% for non-oily debris with a diameter of zero.three micrometers or extra in the air. which means that the mask can efficaciously block most bacteria, viruses, and different microorganisms, presenting basic protection for the user.

2. Bacterial Filtration performance: The bacterial filtration efficiency of the masks should now not be less than ninety nine.nine%, making sure the reliability of the masks in blockading the spread of bacteria.

three. Breathability Resistance: the usual specifies the breathability resistance of the masks, requiring that the resistance to air beneath normal respiration situations have to be much less than 34kPa. which means the wearer will not sense too stuffy in the course of respiratory, ensuring comfort.

four. Microbial mission take a look at: within the microbial task take a look at, the filtration performance of each masks for Staphylococcus aureus and Klebsiella pneumoniae should attain a hundred%. This verifies that the mask can preserve green protective overall performance below excessive conditions.

1. synthetic Blood Penetration take a look at: inside the synthetic blood penetration check, the masks ought to be capable of withstand at the least three.0kPa of pressure to prevent blood penetration. This indicates that the mask has enough protecting talents in stopping the spread of blood.

2. Facial Sealing: The mask need to have proper facial sealing to make sure that there may be no air leakage whilst worn. the same old specifies that the contact areas of the masks with the face have to be tightly sealed to reduce leakage.

3. Water Resistance: in the water resistance check, the masks should be able to face up to immersion for a certain period of time with out damage. This ensures that the masks can preserve defensive overall performance in a humid environment.

4. warmness getting older Resistance: within the warmness growing older resistance test, the masks ought to be able to withstand a positive temperature and time without big harm. This ensures the stability and reliability of the mask over a protracted length of use.

5. Oil Resistance: in the oil resistance check, the masks have to be capable of face up to a certain quantity of oil without affecting the filtration performance. This shows that the masks can hold effective protective feature in distinct environments.

6. Chemical balance: The mask ought to have correct chemical balance and no longer be broken by contact with chemical materials. This guarantees the protection of the mask in a medical environment.

via the stern provisions of the GB2626-2019 wellknown, the protecting overall performance of scientific mask has been considerably stepped forward, supplying customers with safer and extra reliable safety.

Application Scenario: Applicability of Medical Masks in Medical Environments

Non-woven cloth mask, because of their light-weight, clean portability, and green shielding capabilities, were extensively used in scientific environments. beneath is an evaluation in their applicability in special scenarios:

The filtration efficiency of the masks is a key indicator in their shielding performance. In scientific settings, the utility of masks typically focuses on the following factors:

1. medical employees safety: In working rooms, wards, and other areas in which scientific body of workers have direct contact with sufferers or can be uncovered to contamination dangers, using scientific mask is a basic shielding degree. these masks can correctly filter out airborne bacteria and virus debris, reducing the danger of contamination.

2. affected person Isolation: For sufferers suspected or showed to be infected, the use of scientific mask can prevent the unfold of pathogens through the respiratory path to others, thereby attaining isolation.

3. Surgical Sterile Operation: at some stage in surgical procedures, the non-woven cloth mask worn via medical group of workers are a part of the surgical sterile operation, helping to hold the cleanliness of the surgical surroundings.

four. Prevention of respiration sicknesses: in the course of flu season or when respiratory diseases are regularly occurring, scientific masks can assist the general public lessen the inhalation of viruses and micro organism, thereby reducing the threat of contamination.

1. patient Care: whilst being concerned for patients with breathing sicknesses, scientific masks no longer most effective protect medical workforce but additionally reduce the move-infection among sufferers and the outside surroundings.

2. Ventilator-Assisted remedy: For patients requiring ventilator-assisted remedy, the usage of medical mask can save you breathing infections and additionally defend scientific personnel from infection.

3. clinic visitor control: Hospitals also have certain protective requirements for traffic, and scientific mask may be required for visitors to lessen the danger of infection in the hospital.

The applicability of clinical masks in medical environments also：

• comfort: scientific mask are designed with the comfort of the wearer in mind, inclusive of the use of pores and skin-friendly substances to reduce pain from prolonged sporting.

• convenience: The disposable layout of medical masks makes them very clean to exchange and easy, appropriate for frequent substitute.

• monetary: in comparison to different protective products, medical masks are enormously inexpensive, making them appropriate for massive-scale use.

• Traceability: The manufacturing and sale of medical mask are difficulty to strict great manage structures, which facilitate traceability and regulation.

In precis, disposable non-woven fabric masks have a very extensive variety of applicability in clinical environments. They no longer simplest provide powerful protection but additionally meet various wishes of medical body of workers and sufferers.

Price Advantage: Factory Direct Sales, Offering Competitive Pricing with Quality Assurance

The direct factory-to-consumer version connects producers and customers immediately, eliminating middlemen and as a consequence imparting substantial benefits in pricing. here are several aspects of the fee-effectiveness of disposable non-woven fabric masks beneath satisfactory assurance:

1. fee manipulate: With factory direct sales, the cost is successfully controlled via warding off layer upon layer of intermediaries, making the product prices extra less costly.

2. Bulk manufacturing: Factories have the functionality for huge-scale manufacturing, enabling them to fabricate disposable non-woven cloth mask in bulk, which reduces the unit cost and similarly enhances the product’s cost-effectiveness.

3. fine monitoring: Factories are directly answerable for satisfactory control, strictly adhering to the GB2626-2019 trendy from raw material procurement to finished product cargo, ensuring the quality of the masks.

four. transparent Pricing: purchasers can directly apprehend the production prices and selling fees of the product, without hidden prices, making sure fee transparency and permitting purchasers to purchase with confidence.

five. bendy Pricing: Factories adjust their pricing techniques flexibly based totally on marketplace call for and fee modifications, ensuring both profitability and assembly patron buying needs.

1. Promotional activities: Factories regularly maintain promotional activities, which includes cut price income and buy-one-get-one-unfastened gives, permitting clients to revel in extra benefits whilst enjoying exceptional assurance.

2. After-income provider: Factories provide complete after-income service, consisting of product session and go back or alternate, making sure customers have no worries throughout the purchasing process.

eight. Customization services: For different purchaser desires, factories offer customization services, along with custom logos and colorings, to meet unique event and logo merchandising necessities, at the same time as nonetheless preserving competitive pricing.

1. ** materials**: Disposable non-woven cloth mask produced with materials no longer simplest meet environmental requirements but additionally reflect the manufacturing facility’s commitment to social duty, which is also meditated within the product’s value-effectiveness.

2. market reputation: subsidized through top phrase-of-mouth and solid best, the factory’s products have won widespread recognition inside the market, which gives a strong guarantee for the product’s cost-effectiveness.

through a complete attention of these elements, manufacturing facility direct income of disposable non-woven material masks offer quite competitive price-effectiveness underneath best guarantee, making them a great desire for clients while deciding on mask.

After-sales Service: A professional team provides comprehensive support

manufacturing unit offers comprehensive After-sales support, geared toward making sure clients Have a worry-loose revel in.

• expert Technical assist: should clients encounter any doubts or technical issues during use, the expert crew will offer exact answers and answers. Technical guide staff are able to speedy diagnose problems and provide targeted technical steering thru cellphone calls, emails, or online chats.

• response speed: The after-income carrier group is dedicated to responding to patron inquiries inside 24 hours of receipt, making sure that troubles are addressed promptly. In emergency conditions, the group will prioritize processing to make sure that customer hobbies aren’t affected.

• Product education: To assist clients higher apprehend and use the products, the manufacturing facility offers free product training services. both new and existing clients can decorate their product utilization abilities via on line or offline training publications.

• go back and change policy: If the product has quality issues at some stage in regular use, the manufacturing facility will provide return and exchange offerings based totally on the actual state of affairs. customers can enjoy a handy return and change enjoy with the aid of following the required strategies.

• everyday comply with-ups: The after-income service crew will behavior regular comply with-u.s.a.with clients to recognize the product usage state of affairs, accumulate patron feedback, and continuously optimize service fine. This ongoing issue ambitions to establish lengthy-time period and strong client relationships.

• parts deliver: In case of damage to any components, the manufacturing facility gives fast part alternative services. The adequate inventory of parts ensures quick reaction and decreases customers’ waiting time.

• personalized services: recognizing that every patron may additionally have unique desires, the manufacturing facility gives personalized carrier solutions. The service team will develop custom designed provider plans according to the particular needs of the customer.

• first-rate tracking: The manufacturing facility has set up a complete excellent monitoring gadget to make certain that each degree of product first-class meets country wide requirements. If clients find any nice issues with the product, they can right away file them thru the after-income service channel, and the manufacturing unit will take them seriously and take suitable measures.

• continuous development: The manufacturing facility continuously collects patron feedback and marketplace information, dedicated to continuously improving services and products. via non-stop gaining knowledge of and innovation, the manufacturing facility pursuits to provide customers with extra and green after-sales offerings.

via those comprehensive after-income services, the factory ambitions to create a dependable, handy, and efficient utilization environment for customers, thereby improving customer accept as true with and satisfaction within the product.